ಫೋನ್‌ Flight ಮೋಡ್‌ನಲ್ಲಿದ್ರೂ ಬಿಂದಾಸ್ ಆಗಿ ಇಂಟರ್‌ನೆಟ್‌ Use ಮಾಡಿ!

Internet working when flight mode on android

The “Force LTE Only” app is designed to improve the network experience for users by locking their mobile devices to LTE (Long-Term Evolution) mode only. This means that the app forces the device to connect exclusively to LTE networks, avoiding connections to other types of networks such as 3G or 2G. Here’s a comprehensive explanation of its features, benefits, and how it works.

Introduction to LTE

LTE, often referred to as 4G LTE, is a standard for wireless broadband communication for mobile devices. It is known for providing high-speed data transfer, low latency, and improved network efficiency compared to its predecessors (3G and 2G). LTE networks support faster browsing, streaming, and downloading, which are essential for modern smartphone users.

Purpose of the Force LTE Only App

The primary purpose of the “Force LTE Only” app is to enhance the user’s network experience by ensuring their device remains connected to the LTE network. This can be particularly beneficial in the following scenarios:

  1. Improved Data Speeds: By staying on LTE, users can enjoy faster data speeds, which are essential for activities such as streaming high-definition videos, online gaming, and video conferencing.
  2. Better Call Quality: Many carriers support Voice over LTE (VoLTE), which offers superior call quality compared to traditional 3G and 2G calls. By staying on LTE, users can benefit from clearer voice calls.
  3. Reduced Network Switching: Frequent switching between different network types (e.g., from LTE to 3G) can cause disruptions and lead to dropped calls or interrupted data sessions. Forcing LTE only minimizes these issues.
  4. Enhanced Battery Life: Constantly searching for and switching between different network types can drain a device’s battery faster. By locking the device to LTE, the app can help conserve battery life.

How the Force LTE Only App Works

The app provides users with a straightforward interface to access and modify network settings that are typically hidden within the device’s operating system. Here’s how it typically works:

  1. Network Mode Selection: The app allows users to select the preferred network mode. In this case, users can set their device to use LTE only. This setting is usually buried deep in the Android settings or accessible via specific dialer codes (USSD codes).
  2. Accessibility: The app provides a user-friendly interface to access these settings without needing to navigate through complex menus or inputting codes manually.
  3. Compatibility: It is designed to work with a wide range of Android devices. However, the app’s effectiveness may vary depending on the device manufacturer and carrier restrictions.
  4. Advanced Options: Some versions of the app may offer additional features such as displaying detailed network information, monitoring signal strength, and providing diagnostics tools to help users understand their network environment better.

Benefits of Using Force LTE Only App

The Force LTE Only app offers several advantages for users who need consistent and high-speed connectivity:

  1. Consistent High-Speed Data: By forcing the device to connect to LTE only, users can enjoy a more stable and faster internet connection, which is crucial for activities that require significant bandwidth.
  2. Better Call Quality with VoLTE: Many users experience improved call quality and fewer dropped calls when their devices are connected to LTE due to the benefits of VoLTE technology.
  3. Battery Efficiency: Since the device does not need to constantly search for and switch between different network types, there can be a noticeable improvement in battery life.
  4. Ease of Use: The app simplifies the process of setting the device to LTE only, which can be particularly useful for users who are not technically savvy.
  5. Network Stability: For users in areas where LTE coverage is strong, forcing LTE only can prevent the device from dropping down to 3G or 2G networks, thus maintaining a stable connection.

Potential Limitations

While the Force LTE Only app can offer significant benefits, there are also some potential limitations to consider:

  1. Coverage Limitations: Not all areas have strong LTE coverage. In regions with poor LTE signal strength, forcing LTE only can result in no service or weak connectivity.
  2. Carrier Restrictions: Some mobile carriers may lock network settings or restrict certain features, limiting the app’s effectiveness.
  3. Emergency Calls: In some cases, forcing LTE only might affect the device’s ability to make emergency calls if LTE coverage is insufficient.
  4. Device Compatibility: The app may not work on all devices, especially those with heavy carrier or manufacturer customizations.

Technical Aspects

The technical implementation of the Force LTE Only app involves using Android’s telephony APIs and hidden settings. Here are some technical aspects:

  1. Telephony Manager: The app leverages the Android Telephony Manager to access and modify network settings. This API provides methods to set preferred network types and retrieve network information.
  2. Hidden Codes and Commands: Android devices often have hidden codes (USSD or MMI codes) that can be dialed to access specific network settings. The app automates this process, providing a simple interface to change these settings.
  3. Root Access: On some devices, advanced features of the app might require root access to modify system-level settings that are not normally accessible to standard apps.
  4. Diagnostics and Monitoring: The app can provide real-time data about network conditions, including signal strength, network type, and cell tower information. This helps users understand their connectivity and troubleshoot issues.


The Force LTE Only app is a valuable tool for users who require consistent, high-speed mobile internet and better call quality. By locking the device to LTE, it minimizes disruptions caused by network switching and enhances the overall user experience. However, users should be aware of potential limitations such as coverage issues and carrier restrictions. The app’s user-friendly interface and advanced features make it accessible and beneficial for a wide range of Android users looking to optimize their mobile network performance.

App Download Link

What do you think?

Written by ThatsKannada

Leave a Reply

GIPHY App Key not set. Please check settings

Full HD

ಎಲ್ಲಾನೂ Full HDಲಿ ನೋಡ್ಬಹುದು, Download ಮಾಡ್ಬೋದು. ಅದು ಕೂಡ freeಯಾಗಿ…!

mobile recharge commission

ಈ App ಮೂಲಕ Recharge ಮಾಡಿದ್ರೆ ಪ್ರತೀ ರೀಚಾರ್ಜ್‌ ಮೇಲೆ ಕ್ಯಾಶ್‌ಬ್ಯಾಕ್‌ ಪಕ್ಕಾ!